SEARCH WHAT YOU WANT
Environmental Test Chambers
AGREE Chambers
Walk-In Aging Test Room
Intelligent High Temperature Aging Test Room
Altitude Test Chambers
Thermal Shock Chambers
Bench-top Environmental Chambers
Rapid Temp. Changing (Humidity) Test Chambers
High-low Temp. (Humidity) Test Chambers
Stability Chambers
Pharmaceutical Stability Chambers
Drying Ovens
Explosion-Proof Oven
Double Door High Temperature Oven
Inert Gas Oven
Precision Oven
Three Layers Oven
Double-Layers Explosion-Proof Oven
Battery Testing Equipment
Power Battery Nail Penetration And Squeezing Combined Test Machine
Battery Internal Short Circuit Tester – Temperature Control
Programmable Battery Internal Short Circuit Tester
Battery Washing Test Machine
Battery Rotation Test Machine
Battery Heavy Impact Test Cabinet
Mechanical Testing Equipment
Double-arms Drop Test Machine
Single-arm Drop Test Machine
Impact Testing Machine
Simulation Car Transport Vibration Tester
High And Low Temperature Tension Test Machine
Accelerated Weathering Test Chambers
Ultraviolet Aging Test Chambers
Sand and Dust Test Chambers
Rain Test Chambers
Salt Spray Test Chambers
Rapid Temp. Changing (Humidity) Test Chambers
ATMARS AFH and AFT Series ESS test chambers are widely used in the industry of aviation, automobiles, home appliances, research and other fields, for improve the product quality and reliability.
ATMARS AFH and AFT Series ESS test chambers are widely used in the industry of aviation, automobiles, home appliances, research and other fields, for improve the product quality and reliability.
Product Presentation
Rapid temp. changing(humidity) test chamber description:
Rapid temp. changing(humidity) test chamber also known as Environmental Stress Screening (ESS), AST (Accelerated Stress Testing), HALT (Highly Accelerated Stress Test), HASS (Highly Accelerated Stress Screening) or Burn-in test.
ESS chamber is suitable for the whole product, parts and materials for high temperature, low temperature, high and low temperature circulating and temperature stress screening (ESS) test, and constant humidity and cyclic damp heat test. This type of machine mainly used to simulate the product after exposure to rapid change of ambient temperature and in certain humidity conditions, detecting the product features and the adapt change ability.
Product Features:
ESS test chamber can set a variety of stress screening (fast temperature change rate) at a rate of 5°C/min, 10°C/min, 15°C/min and 25°C/min experimental conditions. Optional humidity range: 20%R.H. to 98% R.H. (Lower humidity is available.)
Rapid temp. changing(humidity) test chamber description:
Rapid temp. changing(humidity) test chamber also known as Environmental Stress Screening (ESS), AST (Accelerated Stress Testing), HALT (Highly Accelerated Stress Test), HASS (Highly Accelerated Stress Screening) or Burn-in test.
ESS chamber is suitable for the whole product, parts and materials for high temperature, low temperature, high and low temperature circulating and temperature stress screening (ESS) test, and constant humidity and cyclic damp heat test. This type of machine mainly used to simulate the product after exposure to rapid change of ambient temperature and in certain humidity conditions, detecting the product features and the adapt change ability.
Product Features:
ESS test chamber can set a variety of stress screening (fast temperature change rate) at a rate of 5°C/min, 10°C/min, 15°C/min and 25°C/min experimental conditions. Optional humidity range: 20%R.H. to 98% R.H. (Lower humidity is available.)
Specification
|
Specifications of AFH Series Rapid temp. changing(humidity) test chamber |
|||||||||||||||
|
Model |
AFH-150 |
AFH-180 |
AFH-225 |
AFH-408 |
AFH-600 |
AFH-800 |
AFH-1000 |
AFH-150 |
AFH-180 |
AFH-225 |
AFH-408 |
AFH-600 |
AFH-800 |
AFH-1000 |
|
|
Temperature humidity adjustment mode |
Smart balanced temperature(humidity) control – BT(H)C |
||||||||||||||
|
Performance |
Temperature range |
-20°C/-40°C/-70°C~+150°C |
|||||||||||||
|
Temperature fluctuation |
±0.5℃ |
||||||||||||||
|
Temperature uniformity |
±2.0°C |
||||||||||||||
|
Temperature deviation |
±2.0℃ |
||||||||||||||
|
Fast Temp. change range |
-20°C/-40°C/-55°C~+85°C |
||||||||||||||
|
Fast Temp. change rate |
5°C/min 10°C/min 15 °C/min (Average change) |
5°C/min 10°C/min 15 °C/min (Linear change) |
|||||||||||||
|
Humidity range |
20%R.H~98%R.H |
||||||||||||||
|
Humidity fluctuation |
±2.0%RH |
||||||||||||||
|
Humidity uniformity |
±3.0%RH |
||||||||||||||
|
Humidity deviation |
±3.0%RH(>75%RH), ±5.0%RH(≦75%RH) |
||||||||||||||
|
Noise level |
≤78dB (A-weighted sound level, measured when constant state of the machine and 1 meter from the front of the machine.) |
||||||||||||||
|
Workspace volume |
150L |
180L |
225L |
408L |
600L |
800L |
1000L |
150L |
180L |
225L |
408L |
600L |
800L |
1000L |
|
|
Workspace dimensions (WxDxH)mm |
Width(mm) |
600 |
600 |
600 |
800 |
1060 |
1000 |
1000 |
600 |
600 |
600 |
800 |
1060 |
1000 |
1000 |
|
Height(mm) |
600 |
600 |
750 |
850 |
1060 |
1000 |
1000 |
600 |
600 |
750 |
850 |
1060 |
1000 |
1000 |
|
|
Depth(mm) |
460 |
500 |
500 |
600 |
630 |
800 |
1000 |
460 |
500 |
500 |
600 |
630 |
800 |
1000 |
|
|
Exterior dimensions (WxDxH)mm |
Width(mm) |
840 |
860 |
1200 |
1060 |
1360 |
1700 |
1750 |
1290 |
860 |
1500 |
1350 |
1650 |
1700 |
1750 |
|
Height(mm) |
1750 |
1790 |
1780 |
1880 |
1930 |
2030 |
2030 |
2000 |
1790 |
1780 |
1930 |
2040 |
2030 |
2030 |
|
|
Depth(mm) |
1855 |
1780 |
2020 |
2250 |
2450 |
2700 |
2900 |
1820 |
1780 |
2150 |
2700 |
2550 |
2800 |
3000 |
|
|
Material |
Interior |
Matte SUS #304 Stainless Steel Plates |
|||||||||||||
|
Exterior |
Powder coated carbon steel plates (With electrostatic spray coating) |
||||||||||||||
|
Seal |
Imported Silicone Seal |
||||||||||||||
|
|
Insulation |
Hard Polyurethane Foam Insulation and Glass Wool |
|||||||||||||
|
Refrigerating system |
Compressor |
Copeland hermetic type compressor / BITZER semi-hermetic compressor, Zero Ozone Depletion Potential (ODP) Refrigerant |
|||||||||||||
|
Cooling method |
Air-cooled or Water-cooled Cooling Mode for Option |
||||||||||||||
|
Controller |
Display: LED true color ultrathin touch screen, English menu, touch screen input |
||||||||||||||
|
Safety precautions |
1). Heater no-load running protection switch 2). Humidifier no-load running protection switch 3). Heater over-current circuit breaker 4). Humidifier over-current circuit breaker 5). Compressor high pressure protection switch 6). Compressor overheat protection switch 7). Compressor over-current protection switch 8). Over-voltage owe anti-phase protector i). Circuit breaker 9). No-fuse switch 10). Humidifier low water level protector 11). Water tank low water level warning |
||||||||||||||
|
Standard configurations |
Transparent electrothermal film double layer glass observation window *1 Lead holes*2, Lighting lamp*1, Casters*4, Stainless steel sample trays*2, Cable*1(2.5m) |
||||||||||||||
|
Electrical supply |
AC 3ψ4W 380V 50HZ(R.S.T.N plus ground wire) (voltage fluctuation≦±10%) |
||||||||||||||
|
Meet the requirements of the standards |
GB/T 10586-2006, GB/T 10592-2008,GB/T 2423.1-2008,GB/T 2423.2-2008,GB/T 2423.3-2016,GB/T 2423.4-2008,GJB 150.3-1986,GJB/T 150.4-1986,GJB/T 150.9-1986 |
||||||||||||||
|
Temperature and humidity performance test standard according to the stipulate of lEC60068-3, the sensor is installed on the air outlet of the unit. |
|||||||||||||||
|
▲Custom options available |
|||||||||||||||
|
Specifications of AFH Series Rapid temp. changing(humidity) test chamber |
|||||||||||||||
|
Model |
AFH-150 |
AFH-180 |
AFH-225 |
AFH-408 |
AFH-600 |
AFH-800 |
AFH-1000 |
AFH-150 |
AFH-180 |
AFH-225 |
AFH-408 |
AFH-600 |
AFH-800 |
AFH-1000 |
|
|
Temperature humidity adjustment mode |
Smart balanced temperature(humidity) control – BT(H)C |
||||||||||||||
|
Performance |
Temperature range |
-20°C/-40°C/-70°C~+150°C |
|||||||||||||
|
Temperature fluctuation |
±0.5℃ |
||||||||||||||
|
Temperature uniformity |
±2.0°C |
||||||||||||||
|
Temperature deviation |
±2.0℃ |
||||||||||||||
|
Fast Temp. change range |
-20°C/-40°C/-55°C~+85°C |
||||||||||||||
|
Fast Temp. change rate |
5°C/min 10°C/min 15 °C/min (Average change) |
5°C/min 10°C/min 15 °C/min (Linear change) |
|||||||||||||
|
Humidity range |
20%R.H~98%R.H |
||||||||||||||
|
Humidity fluctuation |
±2.0%RH |
||||||||||||||
|
Humidity uniformity |
±3.0%RH |
||||||||||||||
|
Humidity deviation |
±3.0%RH(>75%RH), ±5.0%RH(≦75%RH) |
||||||||||||||
|
Noise level |
≤78dB (A-weighted sound level, measured when constant state of the machine and 1 meter from the front of the machine.) |
||||||||||||||
|
Workspace volume |
150L |
180L |
225L |
408L |
600L |
800L |
1000L |
150L |
180L |
225L |
408L |
600L |
800L |
1000L |
|
|
Workspace dimensions (WxDxH)mm |
Width(mm) |
600 |
600 |
600 |
800 |
1060 |
1000 |
1000 |
600 |
600 |
600 |
800 |
1060 |
1000 |
1000 |
|
Height(mm) |
600 |
600 |
750 |
850 |
1060 |
1000 |
1000 |
600 |
600 |
750 |
850 |
1060 |
1000 |
1000 |
|
|
Depth(mm) |
460 |
500 |
500 |
600 |
630 |
800 |
1000 |
460 |
500 |
500 |
600 |
630 |
800 |
1000 |
|
|
Exterior dimensions (WxDxH)mm |
Width(mm) |
840 |
860 |
1200 |
1060 |
1360 |
1700 |
1750 |
1290 |
860 |
1500 |
1350 |
1650 |
1700 |
1750 |
|
Height(mm) |
1750 |
1790 |
1780 |
1880 |
1930 |
2030 |
2030 |
2000 |
1790 |
1780 |
1930 |
2040 |
2030 |
2030 |
|
|
Depth(mm) |
1855 |
1780 |
2020 |
2250 |
2450 |
2700 |
2900 |
1820 |
1780 |
2150 |
2700 |
2550 |
2800 |
3000 |
|
|
Material |
Interior |
Matte SUS #304 Stainless Steel Plates |
|||||||||||||
|
Exterior |
Powder coated carbon steel plates (With electrostatic spray coating) |
||||||||||||||
|
Seal |
Imported Silicone Seal |
||||||||||||||
|
|
Insulation |
Hard Polyurethane Foam Insulation and Glass Wool |
|||||||||||||
|
Refrigerating system |
Compressor |
Copeland hermetic type compressor / BITZER semi-hermetic compressor, Zero Ozone Depletion Potential (ODP) Refrigerant |
|||||||||||||
|
Cooling method |
Air-cooled or Water-cooled Cooling Mode for Option |
||||||||||||||
|
Controller |
Display: LED true color ultrathin touch screen, English menu, touch screen input |
||||||||||||||
|
Safety precautions |
1). Heater no-load running protection switch 2). Humidifier no-load running protection switch 3). Heater over-current circuit breaker 4). Humidifier over-current circuit breaker 5). Compressor high pressure protection switch 6). Compressor overheat protection switch 7). Compressor over-current protection switch 8). Over-voltage owe anti-phase protector i). Circuit breaker 9). No-fuse switch 10). Humidifier low water level protector 11). Water tank low water level warning |
||||||||||||||
|
Standard configurations |
Transparent electrothermal film double layer glass observation window *1 Lead holes*2, Lighting lamp*1, Casters*4, Stainless steel sample trays*2, Cable*1(2.5m) |
||||||||||||||
|
Electrical supply |
AC 3ψ4W 380V 50HZ(R.S.T.N plus ground wire) (voltage fluctuation≦±10%) |
||||||||||||||
|
Meet the requirements of the standards |
GB/T 10586-2006, GB/T 10592-2008,GB/T 2423.1-2008,GB/T 2423.2-2008,GB/T 2423.3-2016,GB/T 2423.4-2008,GJB 150.3-1986,GJB/T 150.4-1986,GJB/T 150.9-1986 |
||||||||||||||
|
Temperature and humidity performance test standard according to the stipulate of lEC60068-3, the sensor is installed on the air outlet of the unit. |
|||||||||||||||
|
▲Custom options available |
|||||||||||||||
Previous:No more data
Next:No more data
FEEDBACK